Ghost Immobiliser - Protect Your Vehicle From Auto Thieves
A ghost immobiliser protects your vehicle from auto theft. It's low-cost and simple to install. It connects to your CAN bus and is controlled by your ECU (engine controller unit).
It generates an unique PIN sequence that you have to enter before starting your car. It can be used in conjunction with tracking devices and alarm systems for cars to create an effective defense against thieves.
Theft Prevention
If you have a ghost immobiliser on your vehicle, thieves will be unable to get your car started. This is because the system will ask you to enter a pin number, or a particular sequence of buttons that only you are aware of. If they can't do this, they'll fight to take your car back, and they may be dissuaded from stealing it entirely.
It's no surprise that car owners want to secure their prized possessions. The number of vehicle thefts is rising each year. Ghost immobilisers can help prevent theft through contactless technology, since they make it difficult for thieves to start your vehicle without the correct key. They also prevent hotwiring - the type of theft which is becoming more common as thieves become more technologically adept.
These systems are also undetectable to burglars, since they do not emit any radio signals. This makes them a great addition to a full range of security measures including alarms and GPS trackers. Adding more layers of security could make it much more difficult for thieves to take your car, and keeping your security system up to date will assist in protecting you from the most recent methods used by thieves.
The greatest benefit of a ghost immobiliser, is that you can install it on your vehicle without leaving any marks. This will help keep your car's value and interior in good condition. It is linked to the CAN system of your vehicle, and uses electronic buttons on your dashboard, steering wheel or door panels to create a unique PIN you must enter before you can start your vehicle. It is similar to a password on the computer, and can contain up to 20 characters, making it almost impossible to break.
This type of security is also compatible with a range of vehicles. It can be installed on cars, motorbikes, caravans, trucks and even lawn mowers. It also fights signal jamming, device spoofing and key Cloning, which are among of the most commonly used methods that thieves use to get around other security measures.
Peace of Mind
Ghost immobilisers are a cost-effective method to protect your vehicle from theft. It is also simple to install, and leaves no marks or residue on your vehicle. It is perfect for people who take care of their automobiles, and particularly those who plan to resell them in the near future. This is particularly advantageous for prestige cars, which could lose value if have been stolen in the past.
The device works by generating an individual pin code that is needed to start the engine. It can be adjusted to any length and is changed by the owner at any time. The device is then fixed to the existing interface in your vehicle, such as the steering wheel, centre console or door cards. The system can then recognise any attempts to start the engine with a different key or fob and will issue an emergency PIN to the person who is using it via their smartphone.
how much is a ghost immobiliser is a great deterrent against thieves who want to steal or hack the keys to your car, as they'll be unable to start the vehicle without the proper pin code. This is a fantastic tool that can be utilized in conjunction with a tracker device to help locate your vehicle in the event of theft.
Another feature that acts as an effective deterrent for thieves is the fact that the ghost immobiliser will detect any sound or vibrations in or around your vehicle. This could be a sign that someone is trying to steal it and cause the system to alert the owner's mobile phone.
The device can be set into an "service valet mode" to allow you to give your vehicle over for servicing or cleaning. This can be activated with the pin code you have chosen, and is easily enabled when you return to the vehicle. You can now confidently hand over your car to a valet or transport company, knowing that your vehicle will be protected against any unwanted actions. The Autowatch Ghost II CAN immobiliser can even be put into "service transport mode" when you have to drive it from one garage to another, as when you are preparing for an MOT or a service.
Achieved Value of Your Car
In a world of car thefts that are at an all-time high it is essential that drivers do their best to ensure the safety of their vehicles. The good news is that technology is constantly evolving and improving to fight it, and there are a variety of anti-theft devices that have emerged as a viable solution. The Ghost Immobiliser is one of the most effective anti-theft devices. It can be put in within your vehicle and turns off its engine once the PIN code is entered.
The Ghost Immobiliser works in a simple and efficient way. It communicates with your vehicle's ECU via the CAN data circuit in order to generate a unique number that you need to enter in order to begin your vehicle. The device doesn't emit radio signals, as do traditional immobilisers. This makes it difficult for thieves and other people to detect or bypass the system. Instead it requires the use of a PIN code that can be entered through existing buttons on your dashboard or the steering wheel.
The best thing about ghost immobilisers is that it is hidden and totally unnoticeable, meaning it's not something that will detract from your car's aesthetic or performance. It is a discreet and low-maintenance option that could be fitted to any vehicle, and will not hinder the normal operation of the vehicle.
car ghost immobiliser of a ghost immobiliser is that it helps to keep the value of your vehicle when it's time to sell it. Installing this device can assist you in selling your car for a higher price in the future. Potential buyers might be cautious about purchasing a stolen vehicle.
It's a great idea to consider advanced security options for your vehicle in particular with theft rates in Essex and London are on the rise. Professional installers can easily install a ghost immobiliser which is a subtle and effective option. Essex Tuning offers Ghost Immobiliser Installation near you, which makes the process easy. The company's dedication to customer service and security enhancement ensures that you can rely on them for your vehicle's safety and security.
Easy to Install
A ghost immobiliser provides an additional security measure to deter thieves who are tech-savvy from cloning your car. It works by making it impossible for criminals to begin your vehicle even if they possess the correct keys. It uses buttons in your vehicle, such as the ones on your steering wheel and centre console, to create an unique sequence of pin codes that need to be entered in order to start your vehicle. If you have Ghost installed, you are the only one who can enjoy the joy of driving with pride.
The device is small and can be concealed in a variety of places. It does not have any keyfobs or LED indicators, so it will be difficult to spot by thieves. It is also tamper proof and only activated with your personal PIN code. You can change the code at any time and it's an excellent method to protect your car from thieves and hackers who may be planning to hack or clone your vehicle.
Installation is a process that requires expertise that must be handled by a professional. It involves wiring the Ghost 2 into the vehicle's CAN bus network, so it can communicate directly with the ECU. It can be installed on any vehicle from cars to motorhomes and vans. It can be installed on vehicles that have electric motors, such as ride-on mowers.
The first step to install the Ghost immobiliser is to identify the power source that can provide a constant 12V supply. Use a wiring diagram to identify the CAN high and low wires inside your vehicle. Using a stripper, carefully remove a small section of the insulation from each wire. Mark the wires using labels or tape to make it easier to distinguish them when installing them.
Connect the CAN H wires as well as the CAN L connector to the engine control unit of your vehicle. Solder or use connectors of high-quality to ensure a tight connection. Use cable ties to connect the wires and ensure that they are secured. In the end, double-check the wire connections to ensure they are insulated and solid.